|
|
Application: |
|
Designed to
protect electrical wiring in applications where dust,
dirt and oil and water are not serious problems.
All sections and fittings are completely open on one
side so wires and cables can be laid in along an entire
wireway run. No pulling through of wires or cables is
required with this design. |
|
|
|
Construction: |
|
16 gauge, 14
gauge, or
12 gauge steel or galvanized steel. |
|
Removable cover fastened with plated steel screws. |
|
Open top
assembly protects wire and cable insulation that might
otherwise be damaged in a pull through wiring system. |
|
No knockouts. |
|
A complete
selection of fittings is available. |
|
|
|
Finish: |
|
ANSI 61 gray
polyester powder finish inside and out over phosphatized
surfaces or galvanized steel. |
|
|
|
Industry Standards: |
|
ETL Listed |
|
Conforms to
UL 870 Type 1 |
|
Conforms to
NEMA standard Type 1 |
